Ammunition · Dock Stamp
Dead Reckon Drift Cartridge Case Transit Pattern
₡1,050
- Physical mass
- 4.082 kg
- Stowed volume
- 0.007 m³
- Measurement
- estimated
- Damage resistance
- DR 8 (estimated)
Rules-ready
3D6 Stats
| Weight | 4.08 kg (9.0 lb) |
|---|---|
| DR | 8 |
| Advantages | None |
| Disadvantages | None |
| Skill bonuses | Uses Armoury (Small Arms) |
- Malf
- 16
- a drop over two yards requires an HT 12 roll; failure imposes Malf. 16 on stored ammunition until Armoury (Small Arms) gauges it
Dead Reckon Drift Cartridge Case Transit Pattern is a hard transit case with isolated cartridge cells, a crush rib, and a seal that shows both opening and pressure loss, intended for declared carriage between gates and pressure zones. The container combines a sealed alloy receiver, ceramic wear inserts, and glove-sized controls. A dropped case sacrifices its outer corners before the cartridge tray. If the witness ridge turns white, the contents need gauging before they enter a weapon.
Maintenance is inspection rather than tinkering: wipe the contacts, read the heat tab, and quarantine anything swollen, scorched, or wet around the seal.
Transit is lawful when declared and temperature tabs remain readable. Customs treats mixed lots and filed-off batch marks as probable diversion stock.
Concord arms permit required. Gate transit requires sealed, declared storage.